Your list is empty, add products to the list to send a request
Smoke Detectors
-
Addressable Sounder Base, Addressable Detectors, Smoke Detection, Smoke Detectors
Codesec Addressable Smoke Detector
Addressable Sounder Base, Addressable Detectors, Smoke Detection, Smoke DetectorsCodesec Addressable Smoke Detector
Applus Laboratories Addressable Smoke Detectors with Base and with Sounder Base are available with Dual Indicator with lightway. By Intelligent Property and Self Calibration Eliminates False Alarms
Shipping: 1-2 Weeks
SKU: fs10766AED94.00 – AED209.00 -
Detectors during Construction, Smoke Detectors, Wireless Detection with Panel
Cygnus CYG4L Smoke Detector
Detectors during Construction, Smoke Detectors, Wireless Detection with PanelCygnus CYG4L Smoke Detector
The Cygnus CYG4L Wireless Smoke Detector has optical smoke sensors. The smoke detectors are an integral part of the system, providing essential detection in and out of working hours on all types of construction projects, in particular, site accommodation units.
Optical smoke detectors work using the light scatter principle. The detector activates the alarm when a preset threshold of smoke penetrates into the sensing chamber.
SKU: fs108107AED2,279.25 -
Detectors during Construction, Smoke Detectors, Wireless Detection with Panel
Cygnus CYG4LPIR – Smoke Detector with PIR
Detectors during Construction, Smoke Detectors, Wireless Detection with PanelCygnus CYG4LPIR – Smoke Detector with PIR
The Cygnus CYG4L Wireless Smoke Detector has optical smoke sensors. The smoke detectors are an integral part of the system, providing essential detection in and out of working hours on all types of construction projects, in particular, site accommodation units.
Optical smoke detectors work using the light scatter principle. The detector activates the alarm when a preset threshold of smoke penetrates into the sensing chamber.
SKU: fs108108AED2,279.25 -
Heat Detectors, Smoke Detectors
Fike Sita 205 0001 Multi-point Asd Detector with Sounder
Multi-function smoke and heat detector with three smoke detection modes and three heat detection modes.
Inbuilt sounder with seven sound patterns and three volumes (75, 85 and 92dB) Inbuilt short circuit isolator.These options are set by PC or control panel depending on the system type.
The optical chamber is monitored for contamination which is then indicated by the LED.SKU: fs108363AED307.00 -
Heat Detectors, Smoke Detectors
Fike Sita 205 0003 Multipoint Asd Detector
Multi-function smoke and heat detector with three smoke detection modes and three heat detection modes .
Inbuilt short circuit isolator.These options are set by PC or control panel depending on the system type.
The optical chamber is monitored for contamination which is then indicated by the LED.SKU: fs108364AED247.00 -
Heat Detectors, Smoke Detectors
Fike Sita 205 0012 Multipoint Asd Detector With Sounder/Strobe
Multi-function smoke and heat detector with three smoke detection modes and three heat detection modes.
Inbuilt sounder/strobe with seven sound patterns and three volumes (75, 85 and 92dB)Inbuilt short circuit isolator.These options are set by PC or control panel depending on the system type.
The optical chamber is monitored for contamination which is then indicated by the LED.SKU: fs108365AED474.00 -
Detectors, Wireless Detectors, Heat Detectors, Smoke Detectors
Fire Hawk FH700HIA Smoke or Heat Alarm For Deaf(Hearing Impaired)
Detectors, Wireless Detectors, Heat Detectors, Smoke DetectorsFire Hawk FH700HIA Smoke or Heat Alarm For Deaf(Hearing Impaired)
The FH700HIA has been designed to meet the needs of those with hearing impairments. The system incorporates the small control unit with high intensity LED strobe and rechargeable battery back-up. The vibrating pillow pad connects to the control unit and warns the user when in bed. Connected to this would be the Wireless FHB10 (with base).
SKU: fs107294AED250.00 -
Heat Detectors, Smoke Detectors
Gent 34000 – Optical Smoke and Heat Detector
Gent 34000 – 19271-01 Replacement Optical Chamber for 34710 Detectors (Legacy Product). A Chamber removal tool is required to install this part.
The Gent Vigilon System 34000 Optical Smoke & Heat Detector has an inbuilt integral sounder. This unit is designed specifically for use with the Gent Vigilon System 34000 panel.
The Gent Vigilon System 34000 Optical Smoke & Heat Detector Sounder requires a 34700 terminal plate for installation.
SKU: fs107103AED186.38 -
Smoke Detection, Smoke Detectors
GST301 (C-9102) Conventional Smoke Detector
C-9102 Conventional Photoelectric Smoke Detector (hereinafter called the detector) is non-addressable, applicable to hotels, restaurants, office buildings, teaching buildings,banks, warehouses, libraries, computer rooms and switching houses. Used together with P-9907 Active End of Line Unit, it can connect with compatible control panel to conduct the processing of detector signals.
SKU: Fs107221AED60.00 -
Smoke Detectors
Hochiki FB-1 Firebeam Detector with Low Level Controller and 5-40M Reflector
The FB-1 (FIREbeam) is a reflective beam Smoke Detector which features advanced motorised technology allowing it to self-align itself to the centre of the reflector when commissioning. Commissioning is a semi-automatic procedure where the unit aligns itself directly onto the centre of the reflector. Once commissioned the detector continually monitors alignment and will automatically realign itself back to the centre of the reflector if any building movement occurs.
The detector comes with a separate controller unit which allows engineers to commission, monitor and maintain from ground level. Detection range is 40 m for the standard unit, increasing to 80 m or 100 m with the addition of the medium or long-range reflector kits.
The FB-1 features an integral loop module allowing full connectivity to the ESP analogue addressable loop.
SKU: fs107029AED2,026.00 -
Smoke Detectors
Hochiki SOC-E3NM Photoelectric Smoke Detector LPCB
Hochiki SLR-E3NM Marine Approved Photoelectric Smoke Detector LPCB
The SLR-E3M is a Photelectric Smoke Detector, which is fully compatible with the majority of existing Conventional systems.
The SLR-E3M incorporates Hochiki’s unique High Performance photoelectric smoke chamber removing the need to use Ionization Detectors in the majority of applications. This also allows the Detector threshold level to be increased, thereby improving the signal to noise ration and reducing susceptibility to false alarms.
An integral third terminal provides a remote indicator output.The smoke chamber is easily removed or replaced for cleaning and utilities a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light.
SKU: FS0070AED235.00 -
Detectors, Smoke Detection, Smoke Detectors
Honeywell 14506414-001 Standard Sensor Base
The Honeywell 14506414-001 Standard Sensor Base is compatible for use with TC800 Series Analog Addressable Sensors. Mounts on 4 in. square electrical box (with or without plaster ring) with a min.The depth of 1.5 in. (38mm), or on 3½ in. or 4 in. octagonal electrical box with a min depth of 1.5 in (38mm). Please note: All parts should be installed and tested by a certified fire alarm company.SKU: fs10823AED80.00 -
Addressable Detectors, Heat Detectors, Smoke Detection, Smoke Detectors
Honeywell 802374 Multi-sensor Fire Detector
Addressable Detectors, Heat Detectors, Smoke Detection, Smoke DetectorsHoneywell 802374 Multi-sensor Fire Detector
Multi sensor fire detector using patented dual angle optical scatter as well as additional heat detector sensor evaluation to guarantee the detection of different types of fire from smoldering fires to open fires with constant sensitivity level. Smoke sensor signal identification to ensure smoke classification and reduction of false alarm caused by interference,for instance,water vapor and dust.
SKU: fs108157AED500.00 -
Detectors, Smoke Detection, Smoke Detectors
Honeywell System Sensor 2151 Smoke Detector For Special Application
Detectors, Smoke Detection, Smoke DetectorsHoneywell System Sensor 2151 Smoke Detector For Special Application
The 2151 can be used as a pendant mount detector in no-flow/low-flow air-handling systems (0-3,000 FPM). The pendant /plenum mounted 2151 is to be installed into a B114LP or B114LPBT base. This is the perfect combination for installation in ducts where the air velocity is below 500fpm or for duct sizes as small as 8” in
diameter. Pendant mounted in a standard electrical box within the duct, the twist-in/twist-out head allows easy removal from the base for quick cleaning and maintenance. The 2151 heads can be combined with
the System Sensor B114LP 120VAC base or the B114LPBT 24VAC/DC base.SKU: fs108164AED350.00 -
Smoke Detectors
Kidde Airsense – 30422 Stratos Air Heater Box
The Air Heater Unit is designed to raise the temperature of air drawn from a very cold environment by passing it across a heating element just as it leaves the protected area. In this manner the problem of condensation
on sampling pipework external to the protected area is minimized. Warming the air sample will also ensure the components of the Stratos detector operate within the specified temperature tolerances and reduces the possibility of surface condensation.The Stratos Air Heater Unit ensures optimum performance and operation in environments subject to extreme cold conditions, such as frozen storage warehouses.
SKU: FS00033AED5,960.00 -
Smoke Detectors
Kidde Airsense – 30671 Stratos Micra 25 Basic Detector + Docking Station
Kidde Airsense – 30671 Stratos Micra 25 Basic Detector + Docking StationThis detector contains; OK, Fault, Fire indicator lamps and provision for interconnection
to fire alarm system via relay screw contacts or via separate dedicated APIC™ devices
for various Fire Alarm control panels. Maximum sampling pipe length = 50 metres (25 metres in high airflow applications).SKU: FS00038AED6,994.50 -
Smoke Detectors
Kidde Airsense – 30672 Stratos Micra
Kidde Airsense – 30672 Stratos – Micra 100 Basic Detector + Docking StationThis is an enhanced aspiration performance version of the Stratos-Micra 25 product. Two sampling pipe inlets suitable for maximum recommended sampling pipe length of 100 metres (2 x 50M) in high airflow environments.
The system is fully compatible with all other Stratos detectors and ancillary devices such as remotebargraph display and Command Module for interconnection of large quantities of Stratos detection devices.SKU: FS00051AED9,528.00 -
Smoke Detectors
Kidde Airsense – 30764 Stratos
Kidde Airsense -30764 Stratos – Micra 100 Basic Detector + Docking Station + Relay Card
This unit is the same as a 30672 but includes a relay interface card (part no. 30436). The input relay card provides four alarm level relay outputs, a fault output and three pairs of input terminals. Shorting together the relevant pair of input terminals, will activate one of the following features: Remote Reset, Remote Isolate, Remote Day/Night Switching or ClassiFire Override.Alternatively these inputs can be used to monitor a power supply with a N/C fault output.This is an enhanced aspiration performance version of the Stratos-Micra 25 product. Two sampling pipe inlets suitable for maximum recommended sampling pipe length of 100 metres (2 x 50M) in high airflow environments.The system is fully compatible with all other Stratos detectors and ancillary devices such as remotebargraph display and Command Module for interconnection of large quantities of Stratos detection devices.SKU: FS00053AED10,260.75 -
Smoke Detectors
Kidde Airsense -30760 Stratos Micra
Kidde Airsense -30760 Stratos Micra 25 Basic Detector + Docking Station + Relay CardThis unit is the same as the 30671 detector but includes a relay interface card (part no. 30436). The input relay card provides four alarm level relay outputs, a fault output and three pairs of input terminals. Shorting together the relevant pair of input terminals, will activate one of the following features: Remote Reset, Remote Isolate, Remote Day/Night Switching or ClassiFire Override. Alternatively these inputs can be used to monitor a power supply with a N/C fault output.This unit is a sub-miniature very high sensitivity aspirating detector with sensitivity scale ranging from‘hypersensitive’ to ‘low’ sensitivity (0.002 – 25% obs/metre), depending upon environment.This product employs an updated Artificial Intelligence system known as ClassiFire-3D® to
allow it to automatically adjust sensitivity with no external input.
The system also incorporates Laser Dust Discrimination (LDD™), making this product suitable for a wide range ofenvironments, including most dusty or dirty areas.
This detector contains; OK, Fault, Fire indicator lamps and provision for interconnection
to fire alarm system via relay screw contacts or via separate dedicated APIC™ devices
for various Fire Alarm control panels. Maximum sampling pipe length = 50 metres (25 metres in high airflow applications).The system is fully compatible with all other Stratos detectors and ancillary devices such as remotebargraph display and Command Module for interconnection of large quantities of Stratos detection devices.SKU: FS00052AED7,727.50 -
Dubai Civil Defense Approved, Addressable Detectors, Smoke Detectors
MAF – 360 – S2 Analog Addressable Photoelectric Smoke Detector
Dubai Civil Defense Approved, Addressable Detectors, Smoke DetectorsMAF – 360 – S2 Analog Addressable Photoelectric Smoke Detector
MAF-360 – S 2 analog addressable photoelectric smoke detectors are microprocessor controlled state-of-the-art detectors suitable for connection to MAF addressable fire detection control and indicating equipment.
SKU: MAF-360 - S 2AED102.00 -
Smoke Detection, Smoke Detectors
Naffco Shield S-A4011 Optical Smoke Detector
The optical smoke detector uses the same outer case as the smoke detector and is distinguished by the indicator LED which is clear in standby and red in alarm. Within the case is a printed circuit board
which on one side has the light proof chamber with integral gauze surrounding the optical measuring system and on the other the address capture, signal processing and communications electronics. An infrared light emitting diode within its collimator is arranged at an obtuse angle to the photo-diode. The photo-diode has an integral daylight-blocking filter. The IR LED emits a burst of collimated light
every second.In clear air the photo-diode receives no light directly from the IR LED because of the angular arrangement and the dual mask. When smoke enters the chamber it scatters photons from the emitter IR LED onto the photo-diode in an amount related to the smoke characteristics and density. The photo-diode signal is processed by the optical ASIC and passed to the A/D converter on the communications ASIC ready for transmission when the device is interrogated.
SKU: FS00070AED75.00
