Showing 1–20 of 25 results

Show sidebar
Close

CAS381 (MAS850LPS) Loop Wired Wall Mounted Sounder

AED 441.00
MAS850LPS is a stand alone sounder, ideal for applications.
system-sensor-b200s-iv-addressable-synchronizable-intelligent-sounder-base-ivory
Close

Farenhyt System Sensor B200S-IV Addressable Intelligent Sounder Base, Ivory

AED 780.94
Farenhyt System Sensor B200S-IV Addressable Intelligent Sounder Base, Ivory specialty base designs including relay, isolator, sounder, and low-frequency sounder options for
Close

Fireclass 517.050.041 4B Detector Base

AED 18.11
The new FireClass 4B 4in detector base is designed to snap-fit to the ceiling tile adaptor or it can be screw fixed to a ceiling in the traditional manner.
Close

Hochiki BO-BS Loop Powered Base Sounder

AED 236.25
The YBO-BS is an Addressable Loop Powered Sounder Base innvatively designed to give a range of tones and volumes with maximum output of up to 90dB(A) (±2dB(A)) with low current consumption. The YBO-BS is designed to fit to the Standard Base (YBN-R-3) or the Isolator Base (YBO-R-SCI - batch number 6044 or above) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators. It can also be converted into a wall sounder with the simple addition of a cap (SI-CAP). The sounder is ingress protection rated to IP21 and is for internal use only.
Close

Hochiki SI/CAP2 Base Sounder/Isolator Cover(Ivory)

AED 4.20
A protective cap which has been designed for the YBO-BSB2, but can also be fitted to the previous model (YBO-BSB) and the Base Sounder (YBO-BS) when either of these devices isn't fitted with a sensor. The cap is secured via a twist fit.
Close

Hochiki YBD-RA Base Mounting Adaptor

AED 14.70
The YBD-RA Surface Wiring Adapter allows the majority of Hochiki Sensors/Detectors and their Mounting Bases to be fitted flush against a fixing surface whilst also allowing surface wiring (without conduit) to be connected. The adapter features four 9mm x 8mm knock-outs for cables/wires allowing surface-fixed wiring to be connected to an appropriate mounting base (depending on application).
Close

Hochiki YBD-RA Base Mounting Adaptor

AED 56.70
The YBD-RA(WHT) Surface Wiring Adapter allows the majority of Hochiki Sensors/Detectors and their Mounting Bases to be fitted flush against a fixing surface whilst also allowing surface wiring (without conduit) to be connected. The adapter features four 9mm x 8mm knock-outs for cables/wires allowing surface-fixed wiring to be connected to an appropriate mounting base (depending on application).
Close

Hochiki YBN-R/3(SCI)-OEM Short Circuit Isolator Adapter

AED 56.18
The YBN-R/3(SCI)-OEM is an adaptor featuring an integral short-circuit isolator, which has been designed to be fitted to a standard sensor mounting base (YBN-R/3) to convert it into a short-circuit isolator base. This combined unit will then detect and isolate short-circuits on the loop. When a short-circuit is detected the combined unit will drop the power to the rest of the loop. The combined unit is compatible with the ESP range of sensors and does not require a loop address.
Close

Hochiki YBN-UA Recess Adaptor for Ivory ESP &amp

AED 37.80
Model YBN-UA is a mounting adaptor for both the ESP and CDX range of ivory sensors and detectors and their associated mounting bases.  The YBN-UA allows a base and head combination to be flush mounted by providing a recess fixing the ceiling. It must be used with a fixing clamp kit (YYA-1) which secures the YBN-UA within a pre-cut hole up to a maximum ceiling thickness of 30mm (sold separately).
Close

Hochiki YBO-BS Base Sounder – Black Base

AED 187.95
Model YBO-BS(BLK) is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The sounder is Ingress Protection rated to IP21 and for internal use only.
Close

Hochiki YBO-BS Base Sounder – White Case

AED 120.75
Model YBO-BS(WHT) is an addressable loop powered Base Sounder innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3(WHT)) or the Isolator Base (YBO-R/SCI(WHT) - from Batch Number 6044) and can be fitted with any of the white ESP Range of Sensors, Beacons or Remote Indicators. The unit can also be converted into a wall sounder with the simple addition of a Cap (SI/CAP2(WHT)). The sounder is Ingress Protection rated to IP21 and for internal use only.
Close

Hochiki YBO-BSB Loop Powered Base Sounder Beacon

AED 353.17
The YBO-BSB is an addressable loop-powered base sounder with integral beacon, designed to give a range of tones and volumes with a maximum output of up to 90dB(A).The YBO-BSB  fits to the Standard Base (YBN-R/3) or the Isolator Base (YBO-R/SCI - from Batch Number 6044) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators. The unit can also be converted into a wall sounder beacon with the simple addition of a Cap (SI/CAP).  An Auto-Shutdown feature  prevents noise pollution*. Sounder and Beacon elements can be operated independently from each other.  (Shown with an ACA-E Multi-Sensor fitted - not supplied).
Close

Hochiki YBO-BSB2 Base Sounder Beacon – White Case, Red Leds

AED 253.05
Model YBO-BSB2 is an addressable loop powered Base Sounder with integral Beacon, innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base YBN-R/3(SCI) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators. The unit can also be converted into a wall sounder beacon with the simple addition of a Cap (SI/CAP2). The sounder is Ingress Protection rated to IP21 and for internal use only.
Close

Hochiki YBO-BSB2 Base Sounder Beacon Ivory Case, White Leds

AED 210.00
Model YBO-BSB2/WL is an O Rated EN54-23 compliant addressable loop powered Base Sounder with integral Beacon, innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base (YBN-R/3(SCI)) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators. The unit can also be converted into a wall sounder beacon with the simple addition of a Cap (SI/CAP2). The sounder is Ingress Protection rated to IP21 and for internal use only.
Close

Hochiki YBO-BSB2 Base Sounder Beacon White Case, White Leds

AED 210.00
Model YBO-BSB2(WHT)/WL is an O Rated EN54-23 compliant addressable loop powered Base Sounder with integral Beacon, innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Bases (YBO-R/SCI or YBN-R/3(SCI)) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators. The unit can also be converted into a wall sounder beacon with the simple addition of a Cap (SI/CAP2(WHT)). The sounder is Ingress Protection rated to IP21 and for internal use only.
Close

Hochiki YBO-BSB2/RL Base Sounder Beacon – Ivory Case, Red Leds

AED 253.05
Model YBO-BSB2/RL is an O Rated EN54-23 compliant addressable loop powered Base Sounder with integral Beacon, innovatively designed to give a range of tones and volumes with a maximum output of up to 98 dB(A) (±2 dB(A)) with low current consumption. The unit is designed to fit to the Standard Base (YBN-R/3) or the Isolator Base (YBN-R/3(SCI)) and can be fitted with any of the ESP Range of Sensors, Beacons or Remote Indicators. The unit can also be converted into a wall sounder beacon with the simple addition of a Cap (SI/CAP2).
Close

Hochiki YBO-R/3 White Mounting Base for Wall Sounders

AED 8.40
Model YBO-R/3(WHT) is a Sounder Mounting Base, which is fully compatible with Hochiki's ESP range of sensors and designed specifically for the Hochiki range of white wall sounders, the CHQ-WS2(WHT) Wall Sounder and the CHQ-WSB2(WHT) Wall Sounder Beacon. It is supplied with square cable clamps for secure and reliable cable termination.
Close

Hochiki YBO-R/SC Short-Circuit Isolator Base for Wall Sounder

AED 66.68
Model YBO-R/SCI(WHT/SNDR) is a Loop Isolator, which is fully compatible with Hochiki's ESP analogue addressable protocol. The YBO-R/SCI(WHT/SNDR) Base has been specifically designed to be compatible with the white wall sounder (CHQ-WS2(WHT)) and the white wall sounder beacon (CHQ-WSB2(WHT)). The Base incorporates an amber LED to show when it is isolating a section of the loop. The YBO-R/SCI(WHT/SNDR) does not use an address, and has the same wiring configuration as the YBN-R/3 Sensor Base making it very simple to install.
Close

Hochiki YBO-R/SCI RED Isolator Base

AED 118.65
YBO-R/SCI(RED) is a Loop Isolator, which is fully compatible with Hochiki's ESP analogue addressable protocol. The YBO-R/SCI(RED) Base has been designed to be used with the red CHQ-WS2 Wall Sounder or CHQ-WSB Wall Sounder Beacon. The YBO-R/SCI(RED) does not use an address, and has the same wiring configuration as the standard YBN-R/3 Sensor Base making it very simple to install.
Honeywell-EBS-Base-with-Horn
Close

Honeywell EBS Intelligent Sounder Base

AED 696.15
Honeywell EBS Intelligent Sounder Base was designed specifically to meet the needs of dwelling unit applications. It offers maximum flexibility in configuration and operation to meet or exceed the requirements of UL268 and UL464. The sounder base is capable of producing either the distinctive three-pulse temporal pattern (ANSI Temporal 3) fire alarm signal now required by NFPA 72 for commercial and residential applications or a continuous tone by simply removing the included jumper from the device.