Showing 1–20 of 47 results

Show sidebar
Close

Cygnus AUTODI03 GSM Auto Dialer

AED 2,882.79
Cygnus AUTODI03 GSM Auto Dialer speech and text messenger is a simple but effective solution for all the needs of notifying about the security equipment. After triggering GSM speech and text messenger, it automatically sends a voice or text message to one of 9 designated pre-programmed telephone numbers, providing a quick and reliable warning that guarantees total peace of mind.
Close

Cygnus CYG1 Control Panel

AED 7,625.36
Cygnus CYG1 control panel, which is an optional element, is used to capture data from up to 480 devices situated around a site. This data includes active fire alarms, intruder alerts, first aid alert, heat and smoke detector activations, battery low warning and signal failure. It is capable of holding event logs, so the user can go back to an event to find accurate date and time of any alert. The control panel which can run for up to a month using its internal battery also operates on mains power.
Close

Cygnus CYG1 Control Panel with GSM/GPRS Remote Link

AED 12,814.59
Cygnus CYG1 Control Panel with GSM/GPRS Remote Link, which is an optional element, is used to capture data from up to 480 devices situated around a site. This data includes active fire alarms, intruder alerts, first aid alert, heat and smoke detector activations, battery low warning and signal failure. It is capable of holding event logs, so the user can go back to an event to find accurate date and time of any alert. The control panel which can run for up to a month using its internal battery also operates on mains power.
Close

Cygnus CYG2 Fire Call Point Alarm

AED 2,164.05
Cygnus CYG2 Fire Call Point Alarm operates using a single battery pack and can be used externally. This radio alarm device has also been designed as a standalone alarm unit. These devices are normally situated around a site in prominent places on main escape routes, stairwells and on, or near fire points where they are visible in case of an emergency.
Close

Cygnus CYG2/85DB Fire Call Point Alarm 85 Decibel

AED 2,037.65
Cygnus CYG2/85DB Wireless Call Point Fire Alarm operates using a single battery pack and is IP rated, thus suitable for external use. This device has been designed as a standalone alarm unit as well as a radio alarm. Operating with a 85 decibel sounder, these devices are built with a less audible sounder for quieter areas such as operational facilities where a 110 decibel level is inappropriate.
Close

Cygnus CYG2/85DBPIR – Fire Call Point Alarm 85 Decibel with PIR

AED 2,489.11
Cygnus CYG2/85DBPIR Wireless Call Point Fire Alarm operates using a single battery pack and is IP rated, thus suitable for external use. This device has been designed as a standalone alarm unit as well as a radio alarm. Operating with a 85 decibel sounder, these devices are built with a less audible sounder for quieter areas such as operational facilities where a 110 decibel level is inappropriate.
Close

Cygnus CYG2F Fire Call Point Alarm with First Aid Alert

AED 2,526.69
Cygnus CYG2F fire call point and first aid alarm has all features of the CYG2 alarm but in addition boast the first aid alert functionality for first aid emergencies. This operates in a different way to a fire alarm so as to distinguish the type of alarm.
Close

Cygnus CYG2FPIR – Fire Call Point Alarm with First Aid Alert and PIR

AED 2,978.15
Cygnus CYG2FPIR fire call point and first aid alarm has all features of the CYG2 alarm but in addition boast the first aid alert functionality for first aid emergencies. This operates in a different way to a fire alarm so as to distinguish the type of alarm.
Close

Cygnus CYG2PIR – Fire Call Point Alarm with PIR

AED 2,615.92
Cygnus CYG2 Fire Call Point Alarm with PIR operates using a single battery pack and can be used externally. This radio alarm device has also been designed as a standalone alarm unit. These devices are normally situated around a site in prominent places on main escape routes, stairwells and on, or near fire points where they are visible in case of an emergency.
Close

Cygnus CYG3L Heat Detector

AED 2,393.21
Cygnus CYG3L Wireless Heat Detector is ideal for detecting heat in and out of working hours for construction projects and site accommodation units etc. The heat detector works by the radio mesh which will transmit and receive all other radio messages from other site alarms. The detector uses a matched pair of thermistors in order to sense heat and when one thermistor is exposed to the ambient temperature, the other is sealed. During normal conditions, the two thermistors will register similar temperatures but on the development of a fire the temperature recorded by the exposed thermistor will rise rapidly.
Close

Cygnus CYG3LPIR – Heat Detector with PIR

AED 2,844.65
Cygnus CYG3LPIR Wireless Heat Detector is ideal for detecting heat in and out of working hours for construction projects and site accommodation units etc. The heat detector works by the radio mesh which will transmit and receive all other radio messages from other site alarms. The detector uses a matched pair of thermistors in order to sense heat and when one thermistor is exposed to the ambient temperature, the other is sealed. During normal conditions, the two thermistors will register similar temperatures but on the development of a fire the temperature recorded by the exposed thermistor will rise rapidly.
Close

Cygnus CYG4L Smoke Detector

AED 2,393.21
Cygnus CYG4L Wireless Smoke Detector has optical smoke sensors. The smoke detectors are an integral part of the system, providing essential detection in and out of working hours on all types of construction projects, in particular, site accommodation units Optical smoke detectors work using the light scatter principle
Close

Cygnus CYG4LPIR – Smoke Detector with PIR

AED 2,393.21
Cygnus CYG4LPIR Wireless Smoke Detector has optical smoke sensors. The smoke detectors are an integral part of the system, providing essential detection in and out of working hours on all types of construction projects, in particular, site accommodation units. Optical smoke detectors work using the light scatter principle
Close

Cygnus CYG5 First Aid Alert Point

AED 1,927.17
Cygnus CYG5 Wireless First Aid Alert Point is different from other alarms to enable people in the area to be able to differentiate the sound from other alarms. When raising the first aid alert, the device will beep intermittently every 8 seconds at 85 decibels. When the alarm has been raised, it will notify the user the exact location of the zone where the alarm has been raised.
Close

Cygnus CYG5PIR – First Aid Alert Point with PIR

AED 2,378.62
Cygnus CYG5PIR Wireless First Aid Alert Point is different from other alarms to enable people in the area to be able to differentiate the sound from other alarms. When raising the first aid alert, the device will beep intermittently every 8 seconds at 85 decibels. When the alarm has been raised, it will notify the user the exact location of the zone where the alarm has been raised. This saves time and helps to get to the casualty quicker.
Close

Cygnus CYG6 Base Panel

AED 4,799.81
Cygnus CYG6 Base Panel has been developed as the control panel, ideal for smaller construction sites. It is an optional element into the Cygnus system, and is used to capture data. This wireless alarm panel can be used in conjunction with other Cygnus control panels but has reduced networking capability and can support up to 32 devices. It has been slightly reduced in size and weight.
Close

Cygnus CYGIOU Input/Output Interface

AED 3,733.43
Cygnus CYGIOU Input/Output unit has been designed for interfacing with other fire systems, turnstile gate entry systems and door release systems. In the case of an alarm activation, where the interface is linked to a turnstile, it will trigger the door release and will deactivate the turnstile so a quick evacuation can be made to the assembly point.
Close

Cygnus CYHF/CP Wireless Manual Call Point with Base and Batteries

AED 1,205.14
Cygnus CYHF/CP Manual Call Point (MCP) is a fully compliant intelligent device which is compatible with the CYHF range of expander and translator modules. This manual call point is resettable and has a visual warning indicator when activated. A reset key is supplied with the MCP for de-activating the alarm and for opening the base and can be supplied with a transparent cover for protection against accidental operation
Close

Cygnus CYHF/EM Wireless Expander Module (Requires Power Supply)

AED 1,691.45
Cygnus CYHF/EM Expander Module is an input output device which is compatible with all CYHF Wireless translators. The unit increases the radio strength and communication beyond a single translator by relaying the radio messages to further expanders devices
Close

Cygnus CYHF/FP CTEC Control Panel 2 Zone

AED 1,524.16
Cygnus CYHF Control Panel is fully certified to EN54 parts 2 and 4. This is a conventional panel but can be linked into the Cygnus fire alarm system using the Cygnus IOU device. This allows the Cygnus system on site to communicate to the wireless alarm system fitted within a Temporary Accommodation Unit (TAU). The control panel communicates to the rest of the CYHF wireless devices via the translator module that is connected to the loop. It is a requirement that a fully certified fire alarm system is fitted within a TAU on a construction site. The control panel is easily installed and is very user friendly.