Potter PS10-EX Pressure Actuated Switch is designed for the detection of a waterflow condition in automatic fire sprinkler systems located in hazardous locations classified as shown above. Typical applications are: Wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves. The PS10-EX is also suitable to provide a low pressure supervisory signal; adjustable between 4 and 20 psi (0,27 and 1,3 BAR).
Previous product
Back to products
Surface Mount Fire Hose Cabinet Single Door Red Powder Coat Finish
AED 399.00 VAT included
Next product
Mobiak MBK15-VALVE212-Angle Landing Valve 2½ Inch Certified
AED 709.80 VAT included
Potter PS10-EX Explosion Proof Pressure Type Waterflow Switch
AED 3,780.00 VAT included
Potter PS10-EX Pressure Actuated Switch is designed for the detection of a waterflow condition in automatic fire sprinkler systems located in hazardous locations classified as shown above. Typical applications are: Wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.
Product Code : fs108123
Brand: Potter
Seller: Fireshop1001
Approved by : [woo_pro_badges_extended]
-
free delivery
Above AED1000 in Dubai
-
WARRANTY
For 365 days
-
always authentic
Only Reputed Brands
-
EASY PAYMENT
Multiple payment options
Specifications
- Product: Explosion Proof Supervisory Pressure Switch
- Brand: Potter
- Dimensions: 152mm Dia. x 178mm H (6” Dia. x 7” H)
- Enclosure: Cast aluminum
- Pressure Connection: 1/2” NPT male brass fitting
- Factory Setting: Both switches operate on pressure increase at: 41 ±7 kPA/.41 ±.07 BAR (6 ±1 PSI) Both switches operate on pressure decrease at: 34 ±7 kPA/.34 ±.07 BAR (5 ±1 PSI)
- Pressure Range: 27-137 kPA/.27-1.3 BAR/ 4-20 PSI
- Maximum Differentia: 7 kPA/.07 BAR (1 PSI)
- Maximum System Pressure: 2068 kPA/20.68 BAR/300 PSI
- Switch Contact Ratings: Two Sets of SPDT (Form C) 15.0 Amps at 125/250 VAC 2.0 Amps at 30 VDC
- Conduit Entrance: 1/2” NPT female conduit opening To maintain type “d” component protection use an Ex component conduit sealing device
- Environmental Specifications: For use in hazardous locations classified by CENELEC: Ex db IIB T6 Gb Class I: Div 1 Groups B, C, D Class II: Div. 1 Groups E, F, G, Class III: Div. 1
- Enclosure Rating: IP66/NEMA 4,9
- Temperature Rating: -40°C to 60°C (-40°F to 140°F)
- Cover Tamper: Cover incorporates tamper resistant fastener that requires a special key for removal. One key is supplied with each device.
Features
- Designed and approved for use in hazardous locations internationally
- Two independently adjustable switches, no tools needed
- Brass pressure connection
- Solid metal enclosure
- Weatherproof
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews (0)
Reviews
Be the first to review “Potter PS10-EX Explosion Proof Pressure Type Waterflow Switch” Cancel reply
Related products
Potter VSR Series Vane Type Waterflow Alarm Switch
AED 609.00 – AED 1,785.00 VAT includedPotter PS40-1 VDS Supervisory Pressure Actuated Switch
AED 420.00 VAT includedPotter OSYSU Outside Screw and Yoke Valve Supervisory Switch
AED 367.50 VAT includedPotter PS100-2 Pressure Type Flow Switch with Two SPDT Contacts
AED 787.50 VAT includedPotter PS25 Supervisory Pressure Switch with Two Sets SPDT Contacts
AED 278.25 VAT includedPotter PS40-2 VDS Supervisory Pressure Actuated Switch
AED 493.50 VAT includedPotter ADPS (Adjustable Deadband Pressure Switch)
AED 630.00 VAT includedReviews
Be the first to review “Potter PS10-EX Explosion Proof Pressure Type Waterflow Switch” Cancel reply
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.