Sense-Ware T-229/4P UV/IR Flame Detector Universal Test Lamp activates UV, IR, and UV/IR Flame Detectors which detect in the 185-235 nm UV and 4.4 µ IR frequency ranges. For UV only detectors the maximum distance is up to 8 meters (26 ft) in the continuous mode. The test range for IR and UV/IR detectors is up to 4 meters (13 ft). Most IR Flame Detectors have an extra alarm criterion; analyzing the flicker frequency of fire. The Test Lamp T-229/4P can be put into the pulse mode by means of a selection switch on the left side of the Test Lamp. The lamp then emits pulsed energy with a frequency of approx. 2 Hz. After the alarm delay time, the IR or UV/IR Flame Detector will activate. Not suitable for: IR/IR- (dual IR), IR/IR/IR (IR3 or triple IR) Flame Detectors, whether or not in combination with a UV sensor. For use in safe areas only.
Previous product
Back to products
Salvator RV-PCSS-06 Retractable Fall Arrestor Block - 6 Mtrs
AED 945.00 VAT included
Next product
Solo 100 Smoke Detector Tester Access Pole 6 Meters
AED 2,257.50 VAT included
Senseware T-229/4P UV/IR Flame Detector Universal Test Lamp
AED 6,898.50 VAT included
Specifications
- Product: UV/IR Flame Detector Universal Test Lamp
- Brand: Sense-Ware
- Model: T-229/4P
- Test range UV Flame Detectors: up to 8 m (26 ft) in continuous mode, up to 4 m (13 ft) in pulse mode
- Housing; material, dimensions / weight: ABS/PC, 160 x 140 x 260 mm (6.5 x 5.5 x 10 “); 0.65 kg (1.4 lbs)
- Optional carrying case: Polypropylene, inlay: Polyurethane
- Battery: Sealed Lead Acid, 12 V / 2.7 Ah
- Charger, (Adapter): 100-240 Vac, 1600 mA switching with pins for US, EU, GB and AU
- Light bulb: Broad Band, 12 Vdc / 100 W
- Ingress protection rating IP30
Features
- The life time of the battery is negatively influenced if you use the Test Lamp continuously longer than 10 minutes and in one go. The Test Lamp will automatically stop working after 30 seconds
- The Test Lamp has a protective grate which should not be removed. Warning, after use the grate may be hot. Do not stick objects through the grate.
- Do not use Test Lamp when damaged. Do not open the lamp, send it back for repair. Contact Sense-WARE for details.
- The sealed lead battery has a lifetime of several years. Please ask your local city official how to dispose the unit.
- Make sure testing of the Flame Detectors does not activate unwanted alarm signals.
- Store the Test Lamp clean and dry. A dirty reflector will reduce the test range
- Do not use the Test Lamp in wet conditions.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews (0)
Reviews
Be the first to review “Senseware T-229/4P UV/IR Flame Detector Universal Test Lamp” Cancel reply
Related products
SharpEye FS-1100 Flame Simulator For IR3 and Multi IR Flame Detector
AED 28,955.85 VAT includedTestifire 6001-001 Smoke and Heat Detector Test and Removal Kit – 6 Metres (20 Feet)
AED 14,646.98 VAT includedSolo A5 Smoke Detector Tester Aerosol Spray 250ml
AED 99.75 VAT includedSpectrex SharpEye 40/40C-L4B UV / IR flame detector
AED 14,700.00 VAT includedTestifire 1001-099 Smoke and Heat Detector Tester Kit
AED 10,500.00 VAT includedSharpeye 40/40IR3 40/40C-I-41-AC-Y-8 Triple IR (IR3) Flame Detector
AED 15,750.00 VAT includedMekasentron RX500 Triple Infrared (IR3) Flame Detector
AED 6,090.00 VAT includedReviews
Be the first to review “Senseware T-229/4P UV/IR Flame Detector Universal Test Lamp” Cancel reply
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.