Potter PS10-1 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.
The PS10 is also suitable to provide a low-pressure supervisory signal; adjustable between 4 and 15 psi (0,27 and 1,03 BAR).
Previous product
Back to products
Ø£Øذية السلامة من Rigman التمهيد 329T السلامة - اللون البني
AED 132.30 VAT included
Next product
Omex Upright Sprinkler Head-Chrome Finish(Pack of 5)
AED 110.25 VAT included
Potter PS10-1 Pressure switch with one set SPDT Contacts
AED 420.00 VAT included
Potter PS10-1 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.
Product Code : fs10084
Brand: Potter
Seller: Fireshop1001
Approved by : [woo_pro_badges_extended]
-
free delivery
Above AED1000 in Dubai
-
WARRANTY
For 365 days
-
always authentic
Only Reputed Brands
-
EASY PAYMENT
Multiple payment options
Description
Specifications
- Product: Pressure switch
- Brand: Potter
- Dimensions: 3.78" (9,6cm)W x 3.20" (8,1cm)D x 4.22" (10,7cm)H
- Pressure Connection: Nylon 1/2" NPT Male
- Enclosure: Base – Die-cast, Cover – Die-cast with textured red powder coat finish, single cover screw and rain lip.
- Maximum System Pressure: 300 PSI (20,68 BAR)
- Switch Contacts: SPDT (Form C), 10.1 Amps at 125/250VAC, 2.0 Amps at 30VDC
- Conduit Entrance: Two knockouts provided for 1/2" conduit. Individual switch compartments and ground screws suitable for dissimilar voltages
- Factory Adjustment: 4 - 8 PSI (0,27 - 0,55 BAR)
- Differential: 2 PSI (0,13 BAR) typical
- Environmental Specifications: NEMA 4/IP66 Rated Enclosure - indoor or outdoor when used with NEMA 4 conduit fittings. Temperature range: -40°F to 140°F (-40°C to 60°C)
- UL, cUL, and CSFM Listed, FM and LPC Approved, NYMEA Accepted, CE Marked
Features
- Pressure Actuated Switches are designed for the detection of a waterflow condition in automatic fire sprinkler systems
- The PS10 is also suitable to provide a low pressure supervisory signal; adjustable between 4 and 15 psi
- Device is mounted in the upright position (threaded connection down)
- A wrench is used to tighten the flats on the device
- The tamper resistant screw can b removed with the special key provided.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews (0)
Reviews
Be the first to review “Potter PS10-1 Pressure switch with one set SPDT Contacts” Cancel reply
Related products
Potter OSYSU-EX Explosion Proof OSandY Valve Supervisory Switch
AED 3,780.00 VAT includedPotter ADPS (Adjustable Deadband Pressure Switch)
AED 630.00 VAT includedOmex Upright Sprinkler Head-Chrome Finish(Pack of 5)
AED 110.25 VAT includedPotter RTS Series Room Temperature Switch
AED 210.00 VAT includedPotter PS25 Supervisory Pressure Switch with Two Sets SPDT Contacts
AED 278.25 VAT includedPotter WFSR-F Pressure Activated Water-flow Alarm Switch with Retard
AED 2,520.00 VAT includedPotter OSYSU-CRH Corrosion Resistant OSandY Valve Supervisory Switch
AED 441.00 VAT includedReviews
Be the first to review “Potter PS10-1 Pressure switch with one set SPDT Contacts” Cancel reply
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.