Due to Component and Supply Shortages

From 16 March 2026, FIRESUPPLIES has revised pricing, payment terms, and quotation validity. Please confirm price, stock, and payment terms before placing orders

WELCOME TO FIRESUPPLIES !

0 items / AED 0.00

Previous product

Potter PS15-2 Supervisory Pressure switch with two sets SPDT contacts AED 472.50

Next product

Potter PS40-1 VDS Supervisory Pressure Actuated Switch AED 420.00

Sold out

Click to enlarge

Potter PS25 Supervisory Pressure Switch with Two Sets SPDT Contacts(Obsolete product)

See all products from potter

VAT included

Potter PS25 Series Supervisory Pressure Actuated Switches are designed primarily to detect an increase and/or decrease from normal system pressure in automatic fire sprinkler systems. Typical applications are air/nitrogen supervision in the dry pipe and pre-action systems, pressure tanks, air supplies, and water supplies. The PS25-2 has two switches. The Low switch is factory set to activate at approximately 18 psi (1,2 BAR) on a decrease in pressure. The High switch is factory set to activate at approximately 28 psi (1,9 BAR) on an increase in pressure. NFPA 72 requires a supervisory signal for both high and low pressure conditions.

Compare

Product Code : fs10086 Brand: Potter Seller: Fireshop1001Approved by : [woo_pro_badges_extended]

free delivery
Above AED1000 in Dubai
WARRANTY
For 365 days
always authentic
Only Reputed Brands
EASY PAYMENT
Multiple payment options

Description

Potter PS25 Series Supervisory Pressure Actuated Switches are designed primarily to detect an increase and/or decrease from normal system pressure in automatic fire sprinkler systems. Typical applications are air/nitrogen supervision in the dry pipe and pre-action systems, pressure tanks, air supplies, and water supplies.
The PS25-2 has two switches. The Low switch is factory set to activate at approximately 18 psi (1,2 BAR) on a decrease in pressure. The High switch is factory set to activate at approximately 28 psi (1,9 BAR) on an increase in pressure. NFPA 72 requires a supervisory signal for both high and low pressure conditions. The PS25 is factory set for a normal air pressure of 23 psi. See section heading Adjustments and Testing if other than factory set point is required.

Features

Independent switch adjustment, no tools needed.
Non-corrosive pressure connection.
Separate isolated wiring chambers.
Two conduit / cable entrances
Solid metal enclosure.
Two switch model

Specifications

Product: Supervisory Pressure Switch
Brand: Potter
Dimensions 3.78(9,6cm)Wx3.20(8,1cm)Dx4.22(10,7cm)H
Enclosure: Cover - Die Cast, Finish - Red Powder Coat, Base - Die Cast, All parts have corrosion resistant finishes
Pressure Connection: Nylon 1/2 NPT male
Differential: Typical 1 lb. at 10 PSI (,07 at ,7 BAR), 4 lbs at 60 PSI (,28 at 4,1 BAR)
Pressure Range: 10-60 PSI (,7-4,1 BAR)
Maximum System Pressure: 300 PSI (20,68 BAR)
Temperature range: -40º F to 140ºF (-40ºC to 60ºC)
Contact Ratings: (2) SPDT (Form C) Switches, 10.1 Amps at 125/250 VAC, 2.0 Amps at 30 VDC
Factory Adjustment: PS25-2 operates on increase at 28 PSI (1,9 BAR) and on decrease at 18 PSI (1,2 BAR)
Conduit Entrances: Two knockouts for 1/2 conduit provided. Individual switch compartments and ground screw suitable for dissimilar voltages
Cover Tamper: Cover incorporates tamper resistant fastener that requires a special key for removal. One key is supplied with each device.
Service Use: NFPA 13, 13D, 13R, 72