Showing 1–20 of 80 results

Show sidebar
Close

Evax-100E Voice Evacuation Expander Panels/Modules

AED 5,599.13
The Evax Systems Voice Evacuation System Expander Panels and Modules provide an easy and cost-effective way to increase the output power of an EVAX 25, 50 or 100W voice evacuation system. Voice evacuation panels can be supplied with or without a paging microphone, and include an audio amplifier, Temporal pattern alarm tone, power supply and battery charger. Voice evacuation modules are available without paging microphone, and cabinet, and are intended to be mounted ina UL Listed enclosure.Voice evacuation expanders can be ganged together in any combination to provide up to 2000 Watts of audio power.

Potter – Gentex WSSPK24-15/75WR 24VDC Outdoor Speaker/Strobe

AED 525.00 AED 262.50
Potter - Gentex WSSPK24-15/75WR 24VDC Outdoor Speaker/Strobe is designed to meet code requirements for audio, visual and voice communications. The WSSPK24 speaker/strobe offers a fixed 15/75 candela. The WSSPK Series provides a 25 or 70.7 VRMs speaker with field selectable power taps of 1/8W, 1/4W, 1/2W, 1W, 2W or 4W.
UL listed
potter-jfs-a2-p400r-releasing-control-panel
Close

Potter (P400R) Addressable Releasing Control Panel

AED 10,500.00
Potter JFS-A2 (Potter model P400R) is an expandable analog/addressable releasing fire alarm system with a total system capacity of 2,032 points. The control panel utilizes the exclusive Potter/Nohmi the protocol that includes a complete line of sensors and modules. The system is expandable with a total of fifteen additional addressable Signaling Line Circuits (SLC) each with a maximum of 127 devices. Each SLC may be comprised of any combination of smoke sensor, heat detectors or modules and allows for a total of 50 ohms of impedance and may use any wire compliant with the National Electrical Code (NEC).
Close

Potter ABT Abort Switch (Red Button)

AED 525.00
Potter ABT Abort Switch is designed to be wired to the abort terminals of the Potter PFC-4410-RC, PFC-4410A-RC and PFC-4410RC (9th Edition) releasing panels. The device consists of a stainless steel faceplate and a modular switch assembly. It is designed to mount on a standard double gang electrical enclosure.
Close

Potter ADPS (Adjustable Deadband Pressure Switch)

AED 630.00
Potter ADPS is an Adjustable Deadband Pressure Switch with independent set and reset points that are adjustable throughout the entire operating range of the switch. The minimum deadband (minimum span between set and reset points) may be obtained at any point in the operating range of the switch. A change in pressure greater than the high setting will reposition the switch mechanism to open or close a single snap-action electrical switch.
Close

Potter ARC-100 Addressable Releasing Control Panel

AED 3,675.00
Potter ARC-100 Addressable Releasing Control Panel is an analog/addressable releasing fire alarm system with a total system capacity of 100 addresses. Additional capacity on the system is achieved using multi-point SLC modules. The control panel utilizes the exclusive Potter protocol that includes a complete line of sensors and modules.
Close

Potter BBK-1 Weatherproof Bell Back Box

AED 47.25
The Potter BBK1 is a 4 square weatherproof bell back box for indoor or outdoor applications. In outdoor or wet installations, the bell must be mounted with weatherproof backbox, BBK1 or BBX1.
Close

Potter BVL – Lever Type Bleeder Valve

AED 330.75
Potter BVL – Lever Type Bleeder Valve used as a test valve for pressure operated devices on wet pipe sprinkler systems that have excess pressure, or dry pipe sprinkler systems. The BVL should be installed in-line with the pressure device. It provides a convenient means for removal or testing the pressure-actuated device without affecting the pressure in the system.
Close

Potter CF-135 EWT Explosion Proof Heat Detector

AED 1,739.67
Potter THERMOFLEX Model CF-135EWT is a fixed temperature only detector. The fixed temperature portion consists of a spring-loaded plunger retained by a fusible alloy that releases when the ceiling temperature reaches 135°F (57°C). When released, the plunger strikes a normally open set of contacts and holds them closed.
Close

Potter CF-135 MP Weather Proof Heat Detector

AED 678.76
Potter CF-135 MP CF Series detectors are combination Rate-of-Rise and Fixed Temperature. The Rate-of-Rise function allows the detector to operate when the temperature at the detector increases at a rate of 15°F per minute. The Fixed Temperature portion will cause the detector to operate when it reaches the applicable temperature. The Rate-of-Rise portion of the detector is restorable; however the Fixed Temperature portion is non-restorable HERMOFLEX product group includes standard detectors as well as detectors for hazardous locations and moisture-proof applications.
Close

Potter CF-200 EWT Explosion Proof Heat Detector

AED 1,739.67
Potter CF-200 EWT CF Series detectors are combination Rate-of-Rise and Fixed Temperature. The Rate-of-Rise function allows the detector to operate when the temperature at the detector increases at a rate of 15°F per minute. The Fixed Temperature portion will cause the detector to operate when it reaches the applicable temperature. The Rate-of-Rise portion of the detector is restorable; however the Fixed Temperature portion is non-restorable HERMOFLEX product group includes standard detectors as well as detectors for hazardous locations and moisture-proof applications.
Close

Potter CF-200 MP Weather Proof Heat Detector

AED 678.76
Potter CF-200 MP CF Series detectors are combination Rate-of-Rise and Fixed Temperature. The Rate-of-Rise function allows the detector to operate when the temperature at the detector increases at a rate of 15°F per minute. The Fixed Temperature portion will cause the detector to operate when it reaches the applicable temperature. The Rate-of-Rise portion of the detector is restorable; however the Fixed Temperature portion is non-restorable HERMOFLEX product group includes standard detectors as well as detectors for hazardous locations and moisture-proof applications.
Close

Potter CPS-24 Conventional Photoelectric Smoke Detector

AED 147.00
Potter CPS-24 photoelectric smoke detector utilizes one bicolored LED for indication of status. In a normal standby condition the LED flash Green every 3 seconds. When the detector senses that its sensitivity has drifted outside the UL listed sensitivity window the LED will flash Red every 3 seconds.
Close

Potter CR-135 EWT Rate Of Rise Explosion Proof Heat Detector

AED 1,739.67
Potter CR-135 EWT CR Series detectors are combination Rate-of-Rise and Fixed Temperature. The Rate-of-Rise function allows the detector to operate when the temperature at the detector increases at a rate of 15°F per minute. The Fixed Temperature portion will cause the detector to operate when it reaches the applicable temperature. The Rate-of-Rise portion of the detector is restorable; however the Fixed Temperature portion is non-restorable HERMOFLEX product group includes standard detectors as well as detectors for hazardous locations and moisture-proof applications.
Close

Potter CR-135 MP Rate Of Rise Weather Proof Heat Detector

AED 678.76
Potter CR-135 MP CR Series detectors are combination Rate-of-Rise and Fixed Temperature. The Rate-of-Rise function allows the detector to operate when the temperature at the detector increases at a rate of 15°F per minute. The Fixed Temperature portion will cause the detector to operate when it reaches the applicable temperature. The Rate-of-Rise portion of the detector is restorable; however the Fixed Temperature portion is non-restorable HERMOFLEX product group includes standard detectors as well as detectors for hazardous locations and moisture-proof applications.
Close

Potter CR-165 EWT Rate of Rise Explosion Proof Heat Detector

AED 1,739.67
A cast aluminum housing encloses a standard THERMOFLEX heat detector making it suitable for use in hazardous locations including those requiring detectors that are explosion proof, water and dust tight. Shipping: 1-2 Weeks
Close

Potter CR-165 EWT Rate of Rise Explosion Proof Heat Detector

AED 1,739.67
Potter CR-165 EWT is a combination rate-of-rise and fixed temperature detector that operates in the same way as the CR135EWT, with the exception that the fixed temperature portion releases when the ceiling temperature reaches 200°F (93°C).
Close

Potter CR-200 EWT Rate Of Rise Explosion Proof Heat Detector

AED 1,739.67
Potter CR-200 EWT CR Series detectors are combination Rate-of-Rise and Fixed Temperature. The Rate-of-Rise function allows the detector to operate when the temperature at the detector increases at a rate of 15°F per minute. The Fixed Temperature portion will cause the detector to operate when it reaches the applicable temperature. The Rate-of-Rise portion of the detector is restorable; however the Fixed Temperature portion is non-restorable HERMOFLEX product group includes standard detectors as well as detectors for hazardous locations and moisture-proof applications.
Close

Potter CR-200 MP Rate Of Rise Weather Proof Heat Detector

AED 678.76
Potter CR-200 MP CR Series detectors are combination Rate-of-Rise and Fixed Temperature. The Rate-of-Rise function allows the detector to operate when the temperature at the detector increases at a rate of 15°F per minute. The Fixed Temperature portion will cause the detector to operate when it reaches the applicable temperature. The Rate-of-Rise portion of the detector is restorable; however the Fixed Temperature portion is non-restorable HERMOFLEX product group includes standard detectors as well as detectors for hazardous locations and moisture-proof applications.
Close

Potter CR-200 WC Heat Detector

AED 339.94
Potter CR-200 WC CR Series detectors are combination Rate-of-Rise and Fixed Temperature. The Rate-of-Rise function allows the detector to operate when the temperature at the detector increases at a rate of 15°F per minute. The Fixed Temperature portion will cause the detector to operate when it reaches the applicable temperature. The Rate-of-Rise portion of the detector is restorable; however the Fixed Temperature portion is non-restorable HERMOFLEX product group includes standard detectors as well as detectors for hazardous locations and moisture-proof applications.