Your list is empty, add products to the list to send a request
Previous product
Back to products
Honeywell - Analytics SPXCDULNCXM Carbon monoxide (CO)
AED 11,820.38 VAT included
Next product
Sauter - EY-RU382F001 Room Operating Unit ecoUnit 382 for ecos301/30
AED 246.75 VAT included
Sauter – Motorised Actuator for Unit Valves with Positioner
AED 241.50 VAT included
Sauter – Motorised Actuator for Unit Valves with Positioner
In stock
Product Code : fs05025180
Seller: Fireshop1001
Approved by : [woo_pro_badges_extended]
-
free delivery
Above AED1000 in Dubai
-
WARRANTY
For 365 days
-
always authentic
Only Reputed Brands
-
EASY PAYMENT
Multiple payment options
Description
Auto-calibration: During commissioning (with valve fitted), the spindle of the actuator moves completely to the bottom (zero point). Then the spindle moves to the position that corresponds to the control signal. Confirmation of the end position: When the actuator has been in its start or end position for a lengthy period, every 2 hours the control signal is activated for around 60 seconds. This automatically recalibrates the actuator. The motor positions the valve and cuts out as soon as the stroke posi-
tion matches the controller signal. The LED indicator lights up if power is applied and flashes as long as the motor is running.
Features
- Stepping motor with electronic activation and cut-out
- Attached to valve with M30 × 1.5 thread
- Version with direction of operation 1 (direct acting) or 2 (reverse acting), adjustable
- Adjustable valve strokes
- Automatic stroke adjustment (AXM217SF404)
- Maintenance-free gear unit
- Suitable for retrofitting existing installations using the appropriate adapters
- Status and diagnostic indicator via integrated bi-colour LED
- Fitting position vertically upright to horizontal, not suspended
Specifications
- Brand: Sauter
- Model: AXM217SF402
Related products
Close
Potter PS40-EX Explosion Proof Low/High Supervisory Pressure Switch for Dry Valves – Nominal System Pressure 40 psi
Potter PS40-EX Series Supervisory Pressure Actuated Switches are designed primarily to detect an increase and/or decrease from normal system pressure in automatic fire sprinkler systems located in hazardous locations. Typical applications are: air/nitrogen supervision in dry pipe and pre-action systems, pressure tanks, air supplies, and water supplies. The PS40-EX has two switches. The Low switch is factory set to activate at approximately 30 psi (2,1 BAR) on a decrease in pressure.
Close
Potter PS10-1 Pressure switch with one set SPDT Contacts
Potter PS10-1 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.
Close
Fire Extinguisher Nozzles and Hoses
Fire Extinguisher Nozzles and Hoses Replacement or spare fire extinguisher nozzles and hoses. Available for different types and sizes of
Close
Potter WCS Series Water Column Switch
Potter WCS Series Water Column Switch is an electronic supervisory switch used to detect the presence of a conductive fluid (water) that can accumulate or become trapped in the piping directly above the clapper on a Dry-Pipe or Pre-Action valve. The electronic circuitry of the WCS is designed to indicate the presence of water accumulated to a specific elevation
Close
Potter PS25 Supervisory Pressure Switch with Two Sets SPDT Contacts
Potter PS25 Series Supervisory Pressure Actuated Switches are designed primarily to detect an increase and/or decrease from normal system pressure in automatic fire sprinkler systems. Typical applications are air/nitrogen supervision in the dry pipe and pre-action systems, pressure tanks, air supplies, and water supplies. The PS25-2 has two switches. The Low switch is factory set to activate at approximately 18 psi (1,2 BAR) on a decrease in pressure. The High switch is factory set to activate at approximately 28 psi (1,9 BAR) on an increase in pressure. NFPA 72 requires a supervisory signal for both high and low pressure conditions.
Close
Potter RTS Series Room Temperature Switch
Potter RTS Series consists of a bi-metal operating mechanism, featuring hermetically sealed precious metal contacts, N.O. or N.C., which automatically reset for repetitive operation, eliminating the need for sensing element replacement. Small compact design, highly resistant to vibration and corrosion. Easily installed using the enclosed hardware or adhesive mounting pad. Screw terminals permit easy installation in single or multiple detector circuits. The RTS can also be used for other temperature detection applications
Close
Potter OSYSU Outside Screw and Yoke Valve Supervisory Switch
Potter OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve. This device is available in two models; the OSYSU-1, containing one set of SPDT (Form C) contacts and the OSYSU-2, containing two sets of SPDT (Form C) contacts. These switches mount conveniently to most OS&Y valves ranging in size from 2” to 12” (50mm to 300mm). They will mount on some valves as small as ½” (12,5mm).
Close
Potter PS40-1 VDS Supervisory Pressure Actuated Switch
Potter PS40-1 VDS Series Supervisory Pressure Actuated Switches are designed primarily to detect an increase and/or decrease from normal system pressure in automatic fire sprinkler systems. Typical applications are: Dry pipe systems, pre-action air/nitrogen supervision, pressure tanks, air supplies, and water supplies. The PS40 switch is factory set for 40 PSI (2,8 BAR) normal system pressure.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
