- Repeat fire LED output as standard (if monitored input not used)
- Operational LED blink ‘On/Off’ option
- Monitored Input – which can be Fire, Fault or Supervisory
A new concept in fire detection – a truly intelligent analogue sensor combining exceptional computing power in the sensor as well as the panel to achieve an extremely fast response to a real fire whilst minimizing the risk of false alarms.
New. LEM-320 Loop Expander Module provide NOTIFIER’s ONYX® Series of Fire Alarm Control Panels (FACPs) with Signaling Line Circuits (SLCs). The ONYX® Series NFS-640/NFS2-640 supports one LEM-320; the NFS-3030/NFS2-3030 supports up to five LCM- 320s and five LEM-320s. The LEM-320 module is used to expand the NFS-640/NFS2-640 to a second loop, and to expand each LCM-320 used on the NFS-3030/NFS2-3030 — each NFS-3030/NFS2-3030 LCM-320 supports an expansion LEM-320.
The MP Series is a standard THERMOFLEX single circuit, Normally Open contacts detectors, in which the connectivity is modified with pigtail leads that extend through a seal plate. This provides for enhanced protection against corrosive or moisture-laden environments.
This detector is suitable for use in areas where condensation or corrosion can have harmful effects on circuit wiring connected to standard terminals. Its seal plate (with extended pigtail leads) will mount onto a typical cast exterior back box. The detector is connected to a fire alarm system’s input circuit as an initiating device.
The internal contacts are normally open and will close when the detector operates either on a rate of temperature increase or if the releasing temperature is reached. It is often installed with an addressing module if it is to be annunciated as a specific room or space, e.g. an electrical room, garbage compactor, etc. With its non-metallic diaphragm, the detector can operate normally at low temperatures, making it suitable for non-heated or chilled environments including garages and carports.
Wireless addressable heat detector with attractive and compact design, long battery life, self-calibration and advance self-test.
Made in : UK
The CYHF/HD wireless heat detector is compatible with the CYHF wireless translator and expander modules. This wireless detector is an intelligent device and can be configured to different settings such as; fixed temperature, rate of rise or high temperature.
The TUN-38EX is designed to detect a rapid rise of temperature concurrent with a fire at its early development stage. The detector is installed behind a proper spark proof separator in explosion hazard areas. In the moment of fire hazard, the detector transmits an alarm signal to the fire alarm control panel
The TUN-38EX detectors can operate in lines/loops of the IGNIS 1000 or on the sideline of ADC-4001M adapter in POLON 4000 fire alarm control panels.
Shipping: 1-2 Weeks