- This device can also be supplied as an external IP67 call point.
- The MCP complies fully to EN54:11 & EN54:25
- The call point has a 5-year battery life
Seller : Fireshop1001
The CYHF/CP Manual Call Point (MCP) is a fully compliant intelligent device which is compatible with the CYHF range of expander and translator modules. This manual call point is resettable and has a visual warning indicator when activated. A reset key is supplied with the MCP for de-activating the alarm and for opening the base and can be supplied with a transparent cover for protection against accidental operation. This device can be easily configured on site and is easily mounted.
This unit can be used in any application including construction sites in Temporary Accommodation Units (TAU’s) which require a fully compliant fire alarm system to be fitted.
Shipping : 1-2 weeks
The CYHF/EM Expander Module is an input output device which is compatible with all CYHF Wireless translators. The unit increases the radio strength and communication beyond a single translator by relaying the radio messages to further ex panders devices or directly to the wireless detectors, call points or sounder/ beacons.
The Cygnus GSM control panel has additional functionality to the CYG1 panel. Using a GSM/GPRS modem, activation can be directly reported to a third party monitoring station and/or site personnel via SMS text messaging. The panel can also be accessed from a PC so users can remotely view the system’s status from any location. The user can also set parameters remotely, view event logs, activate the PIR sensors and name alarm devices.
The sensors are activated by using the menu settings on the control panel and if an intruder passes the sensor when in activation mode it will cause the local alarm to sound. To order this additional functionality to any Cygnus alarm units, add PIR to the product code.
The Cygnus fire call point alarm operates using a single battery pack and can be used externally. This radio alarm device has also been designed as a standalone alarm unit. These devices are normally situated around a site in prominent places on main escape routes, stairwells and on, or near fire points where they are visible in case of an emergency. This alarm has a 110 decibel sounder and an LED beacon for visual alerts. The call point is re-settable and can be programmed with a sounder delay. Activating a call point will result in a site wide alert.
The CYHF/SD wireless optical smoke detector is an intelligent device which links into the CYHF wireless system via the translator or expander modules. The range of wireless detectors are fully approved to EN54. This device is capable of being configured on site and has the ability to analyse different types of smoke particles to prevent unwanted alarms.
This device comes with a standard radio base but can be supplied with a sounder or sounder/ beacon base depending on the requirement.