Showing 1–20 of 70 results

Show sidebar
honeywell-analytics-spstaxf1-zareba-sensepoint-gas-detector-atex-approved-1-100-lel-methane
Close

Honeywell Analytics – SPSTAXF1 Zareba Sensepoint Gas Detector , ATEX Approved, 1-100% LEL Methane

AED 1,638.00
Honeywell Analytics – SPSTAXF1 Zareba Sensepoint Gas Detector is an economical and efficient solution that meets the needs of users
Close

Macurco EX-PH3-1P-O Phosphine (PH3) 0-1PPM Explosion Proof Monitor

AED 10,032.75
Macurco EX-PH3-1P-O Phosphine (PH3) 0-1PPM Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters.
Close

Macurco CD-12-H Carbon Dioxide CO2 Fixed Gas Detector – Auto Calibration

AED 2,166.15
Macurco CD-12-H Carbon Dioxide CO2 Fixed Gas Detector - Auto Calibration are line voltage powered (100-240VAC), dual relay gas detector, controller and transducers. The 12-Series utilizes an internal switching power supply that is capable of using line voltage between 100 and 240VAC and 50-60Hz. The 12-Series have selectable 4-20mA output, buzzer and digital display options.
Close

Macurco CD-12-MC Carbon Dioxide CO2 Fixed Gas Detector – Manual Calibration

AED 2,166.15
Macurco CD-12-MC Carbon Dioxide CO2 Fixed Gas Detector - Manual Calibration are line voltage powered (100-240VAC), dual relay gas detector, controller and transducers. The 12-Series utilizes an internal switching power supply that is capable of using line voltage between 100 and 240VAC and 50-60Hz. The 12-Series have selectable 4-20mA output, buzzer and digital display options.
Close

Macurco CD-6-MC Carbon Dioxide CO2 Fixed Gas Detector

AED 1,189.65
Macurco CD-6-MC Carbon Dioxide CO2 Fixed Gas Detectors are low voltage, dual relay gas detector, controller and transducers. The 6-Series have selectable 4-20mA output, buzzer and digital display options. It is an electronic detection system used to measure the concentration of various gases.
Close

Macurco CD-6H Carbon Dioxide CO2 (Low Voltage) Fixed Gas Detector Controller Transducer – Auto Calibration

AED 1,189.65
The Macurco CD-6 is a Low Voltage, dual relay carbon dioxide (CO2) detector, Controller and transducer. The CD-6 has selectable 4-20 MA output, Buzzer and Digital display options. Shipping: 1-2 Weeks
Close

Macurco CD-6H Carbon Dioxide CO2 Fixed Gas Detector

AED 1,189.65
Macurco CD-6 is a low voltage, dual relay Carbon Dioxide (CO2) detector and automatic ventilation controller. The CD-6 uses a microcomputer controlled, electronic system to measure the concentration of CO2, actuate relays and provide a 4-20 mA output. The CD-6 has a low maintenance long life (10+ years) non-dispersive infrared (NDIR) sensor and optional gas test kits. The CD-6 is a low level meter capable of displaying from 0-2000 ppm of carbon dioxide.
Close

Macurco CM-6 Carbon Monoxide CO Fixed Gas Detector

AED 2,415.00
Macurco CM-6 Carbon Monoxide CO Fixed Gas Detector are low voltage, dual relay gas detector, controller and transducers. The 6-Series have selectable 4-20mA output, buzzer and digital display options. It is an electronic detection system used to measure the concentration of various gases. This detector also provide feedback and automatic control to help reduce gas concentrations.
Close

Macurco CM-6-LADBS Carbon Monoxide CO Fixed Gas Detector

AED 1,219.05
Macurco CM-6-LADBS Carbon Monoxide CO Fixed Gas Detector are low voltage, dual relay gas detector, controller and transducers. The 6-Series have selectable 4-20mA output, buzzer and digital display options. It is an electronic detection system used to measure the concentration of various gases. This detector also provide feedback and automatic control to help reduce gas concentrations.
Close

Macurco EX-ASH3-1P-O Arsine (ASH3) 0-1PPM Explosion Proof Monitor

AED 10,032.75
Macurco EX-ASH3-1P-O Arsine (ASH3) 0-1PPM Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters.
Close

Macurco EX-ASH3-1P-R Arsine (ASH3) 0-1PPM Remote Sensor Explosion Proof Monitor

AED 13,299.30
Macurco EX-ASH3-1P-R Arsine (ASH3) 0-1PPM Remote Sensor Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters.
Close

Macurco EX-B2H6-2P-O Diborane (B2H6) 0-2 PPM Explosion Proof Monitor

AED 9,052.05
Macurco EX-B2H6-2P-O Diborane (B2H6) 0-2 PPM Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters.
Close

Macurco EX-B2H6-2P-R Diborane (B2H6) 0-2 PPM Remote Sensor Explosion Proof Monitor

AED 12,319.65
Macurco EX-B2H6-2P-R Diborane (B2H6) 0-2 PPM Remote Sensor Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters.
Close

Macurco EX-BUTAN-100L-O Butanol (BUTAN) 0-100%LEL Explosion Proof Monitor

AED 5,377.05
Macurco EX-BUTAN-100L-O Butanol (BUTAN) 0-100%LEL Explosion Proof Monitors are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters. A remote sensor option is available for difficult or remote monitoring applications.
Close

Macurco EX-BUTAN-100L-R Butanol (BUTAN) 0-100%LEL Remote Sensor Explosion Proof Monitor

AED 8,644.65
Macurco EX-BUTAN-100L-R Butanol (BUTAN) 0-100%LEL Remote Sensor Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters. A remote sensor option is available for difficult or remote monitoring applications.
Close

Macurco EX-C2H4-100L-O Ethylene Gas Detector

AED 5,376.00
Macurco EX-C2H4-100L-O Explosion Proof Ethylene Gas Detectors are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration is accomplished via the non-intrusive magnetic interface that allows programming of all parameters.
Close

Macurco EX-C2H4-100L-R Ethylene (C2H4) 0-100%LEL Remote Sensor Explosion Proof Monitor

AED 8,644.65
Macurco EX-C2H4-100L-R Ethylene (C2H4) 0-100%LEL Remote Sensor Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters. A remote sensor option is available for difficult or remote monitoring applications.
Close

Macurco EX-C3H8-100L-O Propane (C3H8) 0-100%LEL Explosion Proof Monitor

AED 5,377.05
Macurco EX-C3H8-100L-O Propane (C3H8) 0-100%LEL Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters. A remote sensor option is available for difficult or remote monitoring applications.
Close

Macurco EX-C3H8-100L-R Propane (C3H8) 0-100%LEL Remote Sensor Explosion Proof Monitor

AED 8,644.65
Macurco EX-C3H8-100L-R Propane (C3H8) 0-100%LEL Remote Sensor Explosion Proof Monitor are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety. Set-up and calibration are accomplished via a non-intrusive magnetic interface that allows programming of all parameters. A remote sensor option is available for difficult or remote monitoring applications.
Close

Macurco EX-C4H10-100L-O Butane (C4H10) 0-100%LEL Explosion Proof Monitor

AED 5,377.05
Macurco EX-C4H10-100L-O Butane (C4H10) 0-100%LEL Explosion Proof Monitors are used for Class 1 Division 1 applications or harsh environments. A brilliant digital display indicates STEL, TWA and peaks daily value concentrations as well as relay status. A three-color backlight will flash depending on the level of alarm for operator safety.