Farenhyt IDP-HEAT-ROR-IV Intelligent Addressable ROR Thermal Detector
Farenhyt IDP-HEAT-ROR-IV Intelligent Addressable ROR Thermal Detector is designed to provide open area protection with 50-foot spacing capability as approved
Honeywell FS20X Flame Detector
Honeywell FS20X Flame Detector is a Multi-Spectrum and UV/Dual IR/VIS Flame Detector with a proven UV solar-blind sensor. The FS20X
Nippon Hakuyo FD-5112 IR Flame Detector
The Nippon Hakuyo FD-5112 is an IR Flame Detector with Rated Voltage/Current of 30V/100mA and Standby Current 50mA.
Polon Alfa PPW-40REX Multi Band Flame Detector
Polon-Alfa PPW-40REx detector detects electromagnetic radiation within the infrared range. Three detectors detect mentioned radiation. Signals are amplified, processed and interpreted by the microcontroller system. The microcontroller controls the operation of the detector, checks the correctness of its basic circuits and, if irregularities are detected, transmit the information to the control panel.
Polon Alfa PUO-35 Flame Detector
Polon Alfa PUO-35 Flame Detector is designed for detection and signalization of a flame ignition in case of a fire hazard. In the moment of a fire hazard, the detector transmits an alarm signal to the fire alarm control panel.
Polon Alfa PUO-35EX Intrinsically Safe Flame Detector
Polon Alfa PUO-35EX flame detector is designed for detection and signalization of a flame ignition in case of a fire hazard. In the moment of a fire hazard, the detector transmits an alarm signal to the fire alarm control panel.
Polon Alfa Top-40 Multi-Sensor Heat and Flame Detector
Polon Alfa Top-40 Multi-Sensor Heat and Flame Detector, the heat sensor is a thermistor which reacts to the rise of temperature occurring during the first stage of a fire. At the time of the simultaneous detection of both the increase in temperature and flame, the detector transmits an alarm signal to the fire alarm control panel.
Sense-Ware T-229/4P UV/IR Flame Detector Universal Test Lamp
Sense-Ware T-229/4P UV/IR Flame Detector Universal Test Lamp activates UV, IR, and UV/IR Flame Detectors which detect in the 185-235
Talentum Dual IR (IR2) Flame Detector
Talentum Dual IR (IR2) Flame Detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed. They can operate on a conventional 2-wire (14-28 Vdc) fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals.
Talentum Triple IR (IR3) Flame Detector
Talentum Triple IR (IR3) Flame Detectors give high immunity to false flame sources. They have internal self-test sources that check the detectors operation when remotely instructed. They can operate on a conventional 2-wire (14-28 Vdc) fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals.
Tyco 811F MX Flame Detector (Marine)
Tyco 811F MX Flame Detector (Marine) are part of the MXTechnology range of digital addressable fire detectors. It incorporates heat,