Your list is empty, add products to the list to send a request
Detectors
-
Smoke Detection, Duct Detectors
2151 Honeywell Duct Smoke Detector for Special Applications
Description
The 2151 can be used as a pendant mount detector in no-flow/low-flow air-handling systems (0-3,000 FPM). The pendant /plenum mounted 2151 is to be installed into a B114LP or B114LPBT base. This is the perfect combination for installation in ducts where the air velocity is below 500fpm or for duct sizes as small as 8? in diameter.
Pendant mounted in a standard electrical box within the duct, the twist-in/twist-out head allows easy removal from the base for quick cleaning and maintenance. The 2151 heads can be combined with the System Sensor B114LP 120VAC base or the B114LPBT 24VAC/DC base.SKU: fs10208AED 2,000.00 -
Detector Bases
Apollo 45681-215 – XP95 I.S. Mounting Base
The XP95 I.S. Mounting Base has been designed to accept only IS products. This ensures that standard detectors cannot inadvertently be fitted into an intrinsically safe system. XPERT cards are supplied with all bases.
- XPERT addressing
- One way fit
- Only accepts IS detectors
SKU: fs108219AED 60.93 -
Detector Bases
Apollo 45681-242 XP95 Low Power Relay Base
The Intelligent Low Power Relay Base incorporates a low power relay to control field equipment such as automatic door closer.The XP95 IS Mounting Base has been designed to accept only IS products. This ensures that standard detectors cannot inadvertently be fitted into an Intrinsically Safe system. XPERT cards are supplied with all bases.Also available with an increased depth which allows for cables to be inserted from the side (Part No. 45681-209)
SKU: fs108220AED 88.80 -
Detector Bases
Apollo 45681-330 XP95 Sounder Beacon Base
The Intelligent Low Power Relay Base incorporates a low power relay to control field equipment such as automatic door closer.The XP95 IS Mounting Base has been designed to accept only IS products. This ensures that standard detectors cannot inadvertently be fitted into an Intrinsically Safe system. XPERT cards are supplied with all bases.Also available with an increased depth which allows for cables to be inserted from the side (Part No. 45681-209)
SKU: fs108222AED 306.84 -
Detector Bases
Apollo 45681-333 XP95 Beacon Base with Isolator
The Beacon Base is a loop-powered beacon combined with a standard Intelligent Mounting Base.
It is used to signal a fire alarm in enclosed areas.The beacon base can be used with either a detector fitted or with a cap as a stand-alone alarm device.
SKU: fs108223AED 194.37 -
Beam Detectors
APOLLO 55000-268 XP95 Loop Powered Reflective Beam Detector (10-50 Metres)
The Intelligent Reflective Beam Detector differs from a traditional beam detector in that it is a single unit which
houses a transmitter, a receiver and the control electronics. The beam detector is available in two versions: a
single reflector model for distances of 5-50m and a four-reflector unit for distances of 50-100m.
SKU: fs108226AED 3,021.17 -
Beam Detectors
Apollo 55000-273 XP95 Loop Powered Reflective Detector (51-100 METRES)
The Intelligent Reflective Beam Detector differs from a traditional beam detector in that it is a single unit which
houses a transmitter, a receiver and the control electronics. The beam detector is available in two versions: a
single reflector model for distances of 5-50m and a four-reflector unit for distances of 50-100m.
SKU: fs108227AED 3,021.17 -
Flame Detector Testers
Apollo 55000-280 APOLLO XP95 (IR) Flame Detector
The XP95 flame detector is sensitive to low-frequency, flickering infra-red radiation emitted by flames during combustion. It is designed for use in large areas that require a detector to give a fast response in potentially dusty or highly flammable environments.The XP95 infra-red (IR) Flame Detector has been designed for use where open flaming fires may be expected. Applications include aircraft hangars, coal handling and paper manufacturing plants and woodworking environments. The detector is:
SKU: fs108230AED 8,217.42 -
Heat Detectors
Apollo 55000-400 XP95 Standard Heat Detector
The XP95 heat detector has a low air-flow resistant case for good contact between the sensing thermistor and the surrounding air.
Temperature is measured by a single thermistor network which gives a voltage output proportional to the external air temperature.
The signal is processed and transmitted to the control equipment.
SKU: fs108233AED 192.51 -
Heat Detectors
Apollo 55000-401 XP95 High Temperature Heat Detector 90Celcuis
The XP95 heat detector has a low air-flow resistant case for good contact between the sensing thermistor and the surrounding air.
Temperature is measured by a single thermistor network which gives a voltage output proportional to the external air temperature.
The signal is processed and transmitted to the control equipment.
SKU: fs108234AED 192.51 -
Heat Detectors
Apollo 55000-440 XP95 I.S. Heat Detector
The XP95 IS Heat Detector is distinguishable from XP95 IS smoke detectors by its low air-flow resistance case which allows good contact between the sensing thermistor and the surrounding air. The device monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature.
The voltage signal is processed and transmitted to the control equipment in the same way as in the case of the ionisation smoke detector. Full details of the principles of operation and the electrical description are published in the XP95 Engineering Product Guide. XP95 IS detectors have the same operating characteristics as the standard versions.
SKU: fs108235AED 915.15 -
Addressable Detectors, Others
B501BH Honeywell Detector Base
Description
The B501BH sounder base is used with System Sensor 200 and
500 Series sensor heads. Refer to the appropriate manual for
more information on sensors.
The sounder base is intended for use with intelligent systems.SKU: fs10197AED 150.00 -
Single Gas Portable Detector
BW CLIP RT Series – Single Gas Detector( 2&3 Years)
BW CLIP RT Series Single Gas Detector with Real Time – 2 and 3 Years (LEL, O2, H2S & CO) The most user-friendly, reliable and cost-effective way to ensure safety and compliance The BW Clip Series of single-gas detectors provides up to three years of maintenance-free operation.
Just turn on the device and it runs continuously no need for sensor replacement, battery replacement or battery charging. That means great reliability and no downtime plus, with the two-year version for H2S or CO, you can put the device in a hibernation case.
when you’re not using it for a week or more and extend its life by that period of time. Choose from two detectors both of which are compact, lightweight and easy to handle, while tough enough for harsh environments and extreme temperatures
SKU: fs10531AED 1,126.00 -
Single Gas Portable Detector
BW CLIP Series – Single Gas Detector (2&3 Years)
BW Clip – Disposable Single Gas Detector – 2 and 3 Years (LEL, O2, H2S & CO) The most user-friendly, reliable and cost-effective way to ensure safety and compliance. The BW Clip Series of single-gas detectors provides up to three years maintenance-free operation: Just turn on the device and it runs continuously no need for sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.
Plus, with the two-year version for H2S or CO, you can put the device in a hibernation case when you’re not using it for a week or more and extend its life by that period of time. Choose from two detectors; both of which are compact, lightweight and easy to handle, while tough enough for harsh environments and extreme temperatures.SKU: fs10529AED 1,073.00 -
Single Gas Portable Detector
BW Technologies GasALERT Extreme Single Gas Detector
BW Technologies GasALERT Extreme Single Gas Detector Compact and affordable, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a field-replaceable battery and sensor.
A wide range of tamperproof user options and multi-language display make the GasAlert Extreme an ideal solution for a variety of applications; plus, data logging is standard on all units. Calibration is a simple automatic procedure and is compatible with BW’s MicroDock II automatic test and calibration system. Standard Package Contents
SKU: fs10530AED 1,545.00 -
Gas Detection, Detectors & Instruments
BW Technologies M5-PR-1 Replacement Pump For Gas Alert Micro 5
Gas Detection, Detectors & InstrumentsBW Technologies M5-PR-1 Replacement Pump For Gas Alert Micro 5
BW Technologies M5-PR-1 Replacement Pump, Yellow(Without Diffusion Cover) Integral Motorized Sample Pump Kit includes- motorized pump cover, 1 ft. / 30 cm sample probe with a hydrophobic barrier (water trap) and particulate filters, 5 ft. / 1.5 m sampling tubing, three spare particulate filters, and one spare water trap filter.
SKU: fs108321AED 969.50 -
Multi Gas Detector
BW Technologies M5-XWAY-R-P-D-Y-E-00 Gas Alert Micro 5 Series Multi-Gas Portable Detector
Multi Gas DetectorBW Technologies M5-XWAY-R-P-D-Y-E-00 Gas Alert Micro 5 Series Multi-Gas Portable Detector
BW Gas Alert Micro 5 Series Multi-Gas Portable Detector Compact and lightweight instruments are available in diffusion or pumped instruments. The portable gas detectors simultaneously monitor and displays up to five potential atmospheric hazards. The GasAlertMicro 5 PID model also identifies PID detectable VOCs, while the GasAlertMicro 5 IR uses an NDIR sensor to monitor CO2 levels.
Adaptable to a variety of applications, GasAlertMicro 5 Series instruments have an extensive selection of user-settable field options. Use the passcode function to prevent unauthorized modifications of the instrumentÂ’s settings. Compatible with BWÂ’s MicroDock II automatic test and calibration system, GasAlertMicro 5 Series instruments are unparalleled in their versatility, performance, and overall value.
SKU: fs10528AED 8,358.00 -
Detectors, CO Detector
CM-1: Carbon Monoxide Gas Detector
Description
Portable battery operated 115 gram weighted single-gas Carbon Monoxide gas detector. With Permanent, non rechargeable 3.6V lithium battery. Used in parking garages, forklifts, loadind docks, vehicle repair facilities, warehouses, kitchens, laundries, heaters.
Made in : USASKU: fs1021 -
Addressable Sounder Base, Addressable Detectors, Heat Detectors
Codesec Addressable Heat Detector
Codesec Addressable Heat Detector with Base has two indications LED’s, Indicator Output and Class A1. By Intelligent property and self,-calibration eliminates false alarms.
Shipping: 1-2 Weeks
SKU: fs10765AED 94.00 – AED 209.00 -
Addressable Sounder Base, Addressable Detectors, Smoke Detection, Smoke Detectors
Codesec Addressable Smoke Detector
Addressable Sounder Base, Addressable Detectors, Smoke Detection, Smoke DetectorsCodesec Addressable Smoke Detector
Applus Laboratories Addressable Smoke Detectors with Base and with Sounder Base are available with Dual Indicator with lightway. By Intelligent Property and Self Calibration Eliminates False Alarms
Shipping: 1-2 Weeks
SKU: fs10766AED 94.00 – AED 209.00 -
Detectors during Construction, Wireless Detection with Panel
Cygnus AUTODI03 GSM Auto Dialer
The GSM speech and text messenger is a simple but effective solution for all the needs of notifying about the security equipment.
After triggering GSM speech and text messenger, it automatically sends a voice or text message to one of 9 designated pre-programmed telephone numbers, providing a quick and reliable warning that guarantees total peace of mind. Six inputs allow you to connect to alarm panels to detect intruders, nurses’ devices as well as gas and flood sensors. The additional four outputs can be connected to other associated strobe equipment, siren or acoustic siren.
SKU: fs10897AED 2,745.51 -
Detectors during Construction, Wireless Detection with Panel
Cygnus CYG1 Control Panel
The Control Panel is an optional diagnostic element which can be added into any Cygnus system. The panel will capture data from up to 480 devices situated around a site. Including active alarms and faults, with all events being recorded into a file which can be viewed or downloaded. The Control Panel is mains powered and has battery back up. The panel has other features including an evacuate site function which can be used in case of emergency and is also used to switch intruder sensors on or off.
SKU: fs10894AED 7,262.25 -
Detectors during Construction, Wireless Detection with Panel
Cygnus CYG1 Control Panel with GSM/GPRS Remote Link
Detectors during Construction, Wireless Detection with PanelCygnus CYG1 Control Panel with GSM/GPRS Remote Link
The Cygnus GSM control panel has additional functionality to the CYG1 panel. Using a GSM/GPRS modem, activation can be directly reported to a third party monitoring station and/or site personnel via SMS text messaging. The panel can also be accessed from a PC so users can remotely view the system’s status from any location. The user can also set parameters remotely, view event logs, activate the PIR sensors and name alarm devices.
SKU: fs10895AED 12,204.37 -
Detectors during Construction, Wireless Detection with Panel
Cygnus CYG2 Fire Call Point Alarm
The Cygnus fire call point alarm operates using a single battery pack and can be used externally. This radio alarm device has also been designed as a standalone alarm unit. These devices are normally situated around a site in prominent places on main escape routes, stairwells and on, or near fire points where they are visible in case of an emergency. This alarm has a 110 decibel sounder and an LED beacon for visual alerts. The call point is re-settable and can be programmed with a sounder delay. Activating a call point will result in a site wide alert.
SKU: fs10899AED 2,061.38
